-- *****************************************************************
-- CISCO-IETF-PW-FR-MIB.my: Pseudo Wire Frame Relay MIB file
--
-- December 2003, Danny Lee,
--                George Wilkie
--
-- Copyright (c) 2003-2004 by Cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************

CISCO-IETF-PW-FR-MIB DEFINITIONS ::= BEGIN

IMPORTS
      MODULE-IDENTITY,
      OBJECT-TYPE
              FROM SNMPv2-SMI

      ciscoExperiment
              FROM CISCO-SMI
              
      MODULE-COMPLIANCE,
      OBJECT-GROUP
              FROM SNMPv2-CONF

      TEXTUAL-CONVENTION,
      StorageType,
      RowStatus
              FROM SNMPv2-TC

      CpwVcIndexType
              FROM CISCO-IETF-PW-TC-MIB
                                
      InterfaceIndexOrZero
              FROM IF-MIB
              
      DlciNumber
              FROM CISCO-FRAME-RELAY-MIB;
      
cpwVcFrMIB MODULE-IDENTITY
      LAST-UPDATED      "200312160000Z"
      ORGANIZATION      "Cisco Systems, Inc."
      CONTACT-INFO
            "Cisco Systems
             Customer Service

             Postal: 170 W. Tasman Drive
                   San Jose, CA  95134
                   SA

             Tel: +1 800 553-NETS

             Email: cs-framerelay@cisco.com"
      DESCRIPTION
             "Cisco Pseudo Wire Frame Relay MIB
             
             This MIB describes network management objects defined
             for FRoPW services over a Packet Switched Network (PSN).
             
             As described in the IETF Frame Relay over
             Pseudowire (FRoPW) draft,
             draft-ietf-pwe3-frame-relay-01.txt,
             FR VCs and PW can be mapped in 2 modes:
         
             One-to-one mapping mode: a FR VC is mapped
             to a PW.  This mode is described by cpwVcFrTable.
         
             Many-to-one mapping mode (a.k.a. port mode):
             multiple FR VCs assigned to a port are mapped to a PW.
             This mode is addressed by cpwVcFrPortModeTable.
             In this mode, all data frames are directed to the
             associated PSN tunnel regardless of DLCI."

      REVISION      "200312160000Z"
      DESCRIPTION
            "Initial version of this MIB module."

      ::= { ciscoExperiment 112 }


-- Top-level components of this MIB

cpwVcFrNotifications    OBJECT IDENTIFIER ::= { cpwVcFrMIB 0 }
cpwVcFrObjects          OBJECT IDENTIFIER ::= { cpwVcFrMIB 1 }
cpwVcFrConformance      OBJECT IDENTIFIER ::= { cpwVcFrMIB 2 }


--
--
-- PW-FR VC Table

cpwVcFrTable            OBJECT-TYPE
      SYNTAX            SEQUENCE OF CpwVcFrEntry   
      MAX-ACCESS        not-accessible
      STATUS            current
      DESCRIPTION
        "The PW-FR connection table.
        
         Each entry in this table represents a FRoPW
         connection operating in one-to-one mapping mode.
         
         This table uses the same index as the generic
         PW MIB's VC table.  Therefore, each entry in
         cpwVcFrTable has a mapping entry to the
         generic PW MIB VC table associated by the
         PW VC index.

         An entry is created in this table by the agent
         for every entry in the generic PW MIB VC table
         with a VcType of 'frameRelay'."
         
      ::= { cpwVcFrObjects 1 }

cpwVcFrEntry            OBJECT-TYPE
      SYNTAX            CpwVcFrEntry
      MAX-ACCESS        not-accessible
      STATUS            current
      DESCRIPTION
        "An entry in cpwVcFrTable."
         
      INDEX { cpwVcFrPwVcIndex }
              
      ::= { cpwVcFrTable 1 }

CpwVcFrEntry ::= SEQUENCE {
      cpwVcFrPwVcIndex          CpwVcIndexType,
      cpwVcFrIfIndex            InterfaceIndexOrZero,
      cpwVcFrDlci               DlciNumber,
      cpwVcFrAdminStatus        INTEGER,
      cpwVcFrOperStatus         INTEGER,
      cpwVcFrPw2FrOperStatus    INTEGER,
      cpwVcFrRowStatus          RowStatus,
      cpwVcFrStorageType        StorageType
      }

cpwVcFrPwVcIndex        OBJECT-TYPE
        SYNTAX          CpwVcIndexType
        MAX-ACCESS      not-accessible 
        STATUS          current
        DESCRIPTION
          "This object identifies the index to an entry
           in the generic PW table."
        ::= { cpwVcFrEntry 1 }

cpwVcFrIfIndex          OBJECT-TYPE
        SYNTAX          InterfaceIndexOrZero
        MAX-ACCESS      read-create 
        STATUS          current
        DESCRIPTION
          "This object identifies the index to an entry
           in the IF-MIB table.  In this case, it holds
           the ifIndex value of the Frame Relay interface
           associating with the PW connection.
           
           The value of zero means that the InterfaceIndex is
           not known yet."
        DEFVAL { 0 }
        ::= { cpwVcFrEntry 2 }

cpwVcFrDlci             OBJECT-TYPE
        SYNTAX          DlciNumber
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
          "This object identifies the FR DLCI associating
           with this entry in cpwVcFrTable.
           
           This object can be used together with cpwVcFrIfIndex
           to lookup FR VC specific information for the FR PVC
           segment of a FRoPW connection."
           
        ::= { cpwVcFrEntry 3 }
        
cpwVcFrAdminStatus      OBJECT-TYPE
        SYNTAX          INTEGER {
                           up (1),
                           down (2)
                        }                           
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
          "This value of this object indicates the
           administrative status of the FRoPW connection.
           
           The values mean:
           up(1)   - connection is administratively set to
                     the 'up' state for handling traffic.
           down(2) - connection is administratively set to
                     the 'down' state. No traffic is processed
                     at this state."
                     
        ::= { cpwVcFrEntry 4 }

cpwVcFrOperStatus       OBJECT-TYPE
        SYNTAX          INTEGER {
                           active (1),
                           inactive (2),
                           unknown (3)
                        }                           
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
          "This is actual operational status of the logical
           FRoPW connection, which is derived from combining
           the following 2 operational status:
           
           cpwVcFrPw2FrOperStatus
             Operational status of the FR segment on the FRoPW
             connection.
             
           PW Operation Status
             Operational status of the PW segment of the FRoPW
             connection.  The associated object is cpwVcOperStatus
             from the generic PW MIB."
        ::= { cpwVcFrEntry 5 }

cpwVcFrPw2FrOperStatus  OBJECT-TYPE
        SYNTAX          INTEGER {
                           active (1),
                           inactive (2),
                           unknown (3)
                        }                           
        MAX-ACCESS      read-only 
        STATUS          current
        DESCRIPTION
          "The value of the object identifies the current
           operational status of the FR PVC segment of a
           FRoPW connection.
           
           The values mean:
           
           active(1)   - segment is currently operational.
           inactive(2) - segment in currently not operational.
           unknown(3)  - segment current status cannot be
                         determined."
        ::= { cpwVcFrEntry 6 }
        
cpwVcFrRowStatus        OBJECT-TYPE
        SYNTAX          RowStatus
        MAX-ACCESS      read-create 
        STATUS          current
        DESCRIPTION
          "For creating, modifying, and deleting this row."
        ::= { cpwVcFrEntry 7 }
        
cpwVcFrStorageType      OBJECT-TYPE
        SYNTAX          StorageType
        MAX-ACCESS      read-create 
        STATUS          current
        DESCRIPTION
          "Indicates the storage type of this row."
        ::= { cpwVcFrEntry 8 }
        

-- (End of cpwVcFrTable)
--
--

--
--
-- PW-FR Port Mode VC Table

cpwVcFrPMTable          OBJECT-TYPE
      SYNTAX            SEQUENCE OF CpwVcFrPMEntry   
      MAX-ACCESS        not-accessible
      STATUS            current
      DESCRIPTION
        "The PW-FR port mode connection table.
        
         Each entry in this table represents a FRoPW
         connection operating in the port mode.
         
         This table uses the same index as the generic
         PW MIB's VC table.  Therefore, each entry in
         cpwVcFrTable has a mapping entry to the
         generic PW MIB VC table associated by the
         PW VC index.

         An entry is created in this table by the agent
         for every entry in the generic PW MIB VC table
         with a VcType of 'frameRelayPortMode'."
         
      ::= { cpwVcFrObjects 2 }

cpwVcFrPMEntry          OBJECT-TYPE
      SYNTAX            CpwVcFrPMEntry
      MAX-ACCESS        not-accessible
      STATUS            current
      DESCRIPTION
        "An entry in cpwVcFrPMTable."
         
      INDEX { cpwVcFrPMPwVcIndex }
              
      ::= { cpwVcFrPMTable 1 }

CpwVcFrPMEntry ::= SEQUENCE {
      cpwVcFrPMPwVcIndex          CpwVcIndexType,
      cpwVcFrPMIfIndex            InterfaceIndexOrZero,
      cpwVcFrPMAdminStatus        INTEGER,
      cpwVcFrPMOperStatus         INTEGER,
      cpwVcFrPMPw2FrOperStatus    INTEGER,
      cpwVcFrPMRowStatus          RowStatus,
      cpwVcFrPMStorageType        StorageType
      }

cpwVcFrPMPwVcIndex      OBJECT-TYPE
        SYNTAX          CpwVcIndexType
        MAX-ACCESS      not-accessible 
        STATUS          current
        DESCRIPTION
          "This object identifies the index to an entry
           in the generic PW table."
        ::= { cpwVcFrPMEntry 1 }

cpwVcFrPMIfIndex        OBJECT-TYPE
        SYNTAX          InterfaceIndexOrZero
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
          "This object represents the FR port associating with
           the FRoPW connection operating in port mode.
          
           The value in the index identifies an entry in the
           IF-MIB table.
           
           The value of zero means that the InterfaceIndex is
           not known yet."
        ::= { cpwVcFrPMEntry 2 }

cpwVcFrPMAdminStatus    OBJECT-TYPE
        SYNTAX          INTEGER {
                           up (1),
                           down (2)
                        }                           
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
          "This value of this object indicates the
           administrative status of the FRoPW connection.
           
           The values mean:
           up(1)   - connection is administratively set to
                     the 'up' state for handling traffic.
           down(2) - connection is administratively set to
                     the 'down' state. No traffic is processed
                     at this state."
        ::= { cpwVcFrPMEntry 3 }

cpwVcFrPMOperStatus     OBJECT-TYPE
        SYNTAX          INTEGER {
                           active (1),
                           inactive (2),
                           unknown (3)
                        }                           
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
          "This is actual operational status of the logical
           FRoPW connection in port mode, which is derived
           from combining the following 2 operational status:
           
           cpwVcFrPMPw2FrOperStatus
             Operational status of the FR segment on the FRoPW
             connection.
             
           PW Operation Status
             Operational status of the PW segment of the FRoPW
             connection.  The associated object is cpwVcOperStatus
             from the generic PW MIB."
        ::= { cpwVcFrPMEntry 4 }

cpwVcFrPMPw2FrOperStatus OBJECT-TYPE
        SYNTAX          INTEGER {
                           active (1),
                           inactive (2),
                           unknown (3)
                        }                           
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
          "The value of the object identifies the current
           operational status of the associate FR port.
           
           The values mean:
           
           active(1)   - segment is currently operational.
           inactive(2) - segment in currently not operational.
           unknown(3)  - segment current status cannot be
                         determined."
        ::= { cpwVcFrPMEntry 5 }
        
cpwVcFrPMRowStatus      OBJECT-TYPE
        SYNTAX          RowStatus
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
          "For creating, modifying, and deleting this row."
        ::= { cpwVcFrPMEntry 6 }

cpwVcFrPMStorageType    OBJECT-TYPE
        SYNTAX          StorageType
        MAX-ACCESS      read-create 
        STATUS          current
        DESCRIPTION
          "Indicates the storage type of this row."
        ::= { cpwVcFrPMEntry 7 }

-- (End of cpwVcFrPMTable)
--
--


-- Conformance Information
 
cpwVcFrCompliances OBJECT IDENTIFIER 
                                 ::= { cpwVcFrConformance 1 }
cpwVcFrGroups      OBJECT IDENTIFIER
                                 ::= { cpwVcFrConformance 2 }


-- Compliance requirement for read-write implementations.

cpwVcFrFullCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
                "The compliance statement for agents that provide
                 full support for the PW-FR-MIB module."
        MODULE  -- this module
        MANDATORY-GROUPS { cpwVcFrGroup
                         }
                         
        GROUP   cpwVcFrPMGroup
        DESCRIPTION
            "This group is mandatory only for the software
             which supports Pseudowire Frame Relay Port Mode."
                         
        OBJECT  cpwVcFrRowStatus
        SYNTAX  RowStatus
        DESCRIPTION
            "Support for notReady(3) and createAndWait(5) is
             not required."
             
        OBJECT  cpwVcFrPMRowStatus
        SYNTAX  RowStatus
        DESCRIPTION
            "Support for notReady(3) and createAndWait(5) is
             not required."

        ::= { cpwVcFrCompliances 1 }

-- Compliance requirement for read-only implementations.

cpwVcFrReadOnlyCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
                "The compliance statement for agents that only
                 provide read-only support for the PW-FR-MIB module."
        MODULE  -- this module
        MANDATORY-GROUPS { cpwVcFrGroup
                         }
                         
        GROUP   cpwVcFrPMGroup
        DESCRIPTION
            "This group is mandatory only for the software
             which supports Pseudowire Frame Relay Port Mode."
                         
        OBJECT  cpwVcFrIfIndex
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  cpwVcFrDlci
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  cpwVcFrAdminStatus
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  cpwVcFrOperStatus
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  cpwVcFrPw2FrOperStatus
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  cpwVcFrRowStatus
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  cpwVcFrStorageType
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  cpwVcFrPMIfIndex
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  cpwVcFrPMAdminStatus
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  cpwVcFrPMOperStatus
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  cpwVcFrPMPw2FrOperStatus
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  cpwVcFrPMRowStatus
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  cpwVcFrPMStorageType
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        ::= { cpwVcFrCompliances 2 }

-- units of conformance:
 
cpwVcFrGroup OBJECT-GROUP
        OBJECTS {
                  cpwVcFrIfIndex,
                  cpwVcFrDlci,
                  cpwVcFrAdminStatus,
                  cpwVcFrOperStatus,
                  cpwVcFrPw2FrOperStatus,
                  cpwVcFrRowStatus,
                  cpwVcFrStorageType
        }
        STATUS  current
        DESCRIPTION
                "Objects to support cpwVcFrTable." 
        ::= { cpwVcFrGroups 1 }
       
cpwVcFrPMGroup OBJECT-GROUP
        OBJECTS {
                  cpwVcFrPMIfIndex,
                  cpwVcFrPMAdminStatus,
                  cpwVcFrPMOperStatus,
                  cpwVcFrPMPw2FrOperStatus,
                  cpwVcFrPMRowStatus,
                  cpwVcFrPMStorageType
        }
        STATUS  current
        DESCRIPTION
                "Objects to support cpwVcFrPMTable." 
        ::= { cpwVcFrGroups 2 }
        
END